A robot pool cleaner is a fantastic convenience for any pool owner – however, like anything with moving parts, it needs regular TLC in order to keep serving you as it was designed. Whether you’re pulling it out of the closet every day for summer or only using it a couple times a week, ensuring that your air conditioner is properly maintained can save you time, money and a headache.
This manual offers tips on general maintenance that work on all models, such as those from brands like Beatbot to industry veterans like Maytronics, the manufacturer of many popular dolphin or tiger shark cleaners. Routine care is the key to maintaining optimum performance for your swimming pool robot cleaner, particularly in large or heavily debris-heavy pools.
Daily and weekly Robot Pool Cleaner maintenance Normal daily routine for your Pool Cleaner: Using a garden hose, wash the power supply by spraying clean water over it.
Regular use of the pool vacuum robot also means that you should set cleaning habits designed to keep dirt from building up and the robot from straining.
Filters should be washed after every use
Your pool vacuum pool cleaner will extract a variety of debris – from dirt to leaves to sand. Filters should be washed and fully dried after each cleaning. This matters even more if your pool has challenges with algae, which can gunk up filters fast.
Visually Check Brushes and Tracks ONCE A WEEK
Inspect the brush rollers, along with the tracks of your pool cleaning robot, for any signs of wear and tear. Debris such as twigs or hair can entangle around the brush, diminishing its scrubbing power––particularly in the case of a wall climbing pool cleaner.
Inspect the Impeller and Suction Ports
Obstructions in the suction system can slow your robot to a stop. Check the impeller and, if necessary, clear away any debris. This will be very important if you’re asking yourself will a pool robot remove algae? —yes, but only if enough suction is maintained.
Monthly Maintenance Must-Dos
Software Update (Smart Models only)
If your robot pool has Bluetooth or WiFi, Turn on and verify if the firmware has to be updated You can verify that you need to update the firmware of your robot pool for example Aquabot Beatbot AquaSense 2 Ultra or Aquabot Beatbot AquaSense 2 Pro. These updates typically correct bugs and enhance navigation capabilities.
Check Power Cables and Plugs
If you have a corded robot like some of the Maytronics pool cleaner models, check the cords for kinks or fraying. Be certain device plugs are dry and corrosion free before each use.
Check Your Skimmer and Booster Systems
Your skimmer and pool booster pump partner with robotic cleaners in most pools. Make sure these parts are clean and running well to prevent wear of your clean system.
2 Seasonal Storage and Protection
If you shut your pool down between off-seasons, where you store matters.
Store in a Shaded, Dry Area
Never store your robot pool cleaner in direct sun light or around pool chemicals. If you leave it inside then it may rust or the plastic can sometimes start to decay.
Remove Water and Dry Them Completely
Drain all trapped water before storing and allow the robot to dry. If there is residual moisture inside, you can have mold or mildew growth in the interior components.
Disconnect and Clean the filter canisters.
For harder to remove debris, use a mild soap and soft brush. Steer clear of chemicals that are too strong and may chemically dissolve the filter media.
Beatbot’s Best Picks: A Product Break in the Middle of the Page
And if you’re looking to upgrade or simply want a model that’s easier to take care of, Beatbot has some of the most durable and easiest-to-use robots available. Models such as the Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro and Beatbot AquaSense 2 feature quick-release filters, AI path learning and brushless motors for less wear and tear over time.
These pool vacuums are reliable and low maintenance; just hook the hose to your pool vacuum and watch it go!
Algae and acid wash and maintenance
If algae is an issue you have in your pool, consider combining the robot pool cleaner with regular brushing and chemicals. Though a good pool vacuum for algae is helpful, sometimes you need to know how to acid wash pool surfaces to do a complete reset.
Plus, learning how to drain an inground pool without a pump comes in handy for deep cleanings or renovation projects (robot cleaners aren’t going to help if you’ve neglected your pool structurally).
In conclusion: How To Maintain a Robotic Pool Cleaner
A properly maintained robot pool cleaner doesn’t just last longer — it performs better too. As much as you have the convenience of a battery operated pool cleaning robot, a Maytronics pool cleaner, or a high-powered robotic pool cleaner like the Beatbot AquaSense 2 Ultra, maintaining these devices can be beneficial to their lifespan. By adhering to these guidelines, your robotic pool cleaner will be in good working order, capturing algae effortlessly and leaving your pool crystal clear during the entire season.
